Depending on can shape, size and product packed inside. To be confirmed each time.
Max mechanical capacity of 144.000 cans per shift.
5 SEAMING HEADS
Rotary seaming carrousel with 5 seaming heads.
Its excellent seaming quality is backed by the most renowned canmakers.
ROTARY CLINCHER
Vertical motion with six or eight stations.
Best clincher on the market. Perfect for highly overfilled cans such as sardines, squid, cockles, octopus, mussels, sauerkraut…
FOR IRREGULAR CANS
For all can shapes: rectangular, square, oval etc. with max can diagonal of 165 mm.
1/4 club, dingley, oval, hansa and many more.
300 CANS PER MINUTE
Depending on can shape, size and product packed inside.
To be confirmed each time. Max mechanical capacity of 144.000 cans/shift.
5 SEAMING HEADS
Rotary seaming carrousel with 5 seaming heads.
Its excellent seaming quality is backed by the most renowned canmakers.
ROTARY CLINCHER
Vertical motion with eight stations. Best clincher on the market.
Perfect for highly overfilled cans such as: sardines, squid, cockles, octopus, mussels, sauerkraut…
FOR IRREGULAR CANS
For all can shapes: rectangular, square, oval etc. with max can diagonal of 165 mm.
1/4 club, dingley, oval, hansa, and more…
HIGH CAPACITY IRREGULAR CAN SEAMER
1
cans per min
1
cans per 8 hrs shift
1
cans per month
1
cans per year
Cans move through the machine and are seamed in a continuous motion, without stops, smoothly, at constant speed, minimizing liquid spillage. If at any time a can breaks, it continues to work undeterred.
Between 50 and 60 cans per minute can be seamed by each of the 5 heads on a VIKING 300 RAPID. This means minimum wear and therefore a longer lifetime for seaming rolls, chucks and springs, etc.
The best choice for the massive production of 1/4 club, dingley, hansa and oval cans
OUTSTANDING SEAMING QUALITY
JK Somme’s seaming heads for irregular cans are the result of more than 100 years of continuous development. They include standard key features such as the following:
- Patented “Anti Twist” technology allowing copying disc realignment without the need of regrinding.
- Short cycle seaming system with rolls working in opposition for a perfect balanced seam.
- Two first & two second operation seaming rolls/arms.
- Pre-curling roll of the covers (optional).
- Multi-adjustable seaming operation cams.
- Extra rigid seaming levers for a perfect copy.
- Stainless steel finish.
The final result is a seaming quality that meets and exceeds the toughest international seaming standards (American FDA, Canadian CFIA) backed by the most renowned can makers
ROTARY CLINCHER FOR OVERFILLED CANS
It acts as a can topper, pressing down and fitting any protruding product back into the can. It acts also as a guillotine, cutting off sardine tails, octopus tentacles or pieces of meat that hang over the edges of the cans:
- The clincher separates and feeds each lid accurately onto each can body. With 8 stations, process is continuous, slow & precise.
- Pushes and fits overfilled product into the can.
- After that displaces the excess of oil, brine or sauce from each can before seaming.
- Clinches and holds every lid onto its can body at two opposite points.
Safest and most effective rotary clincher on the market when canning complicated products such as large sardines, squid, octopus, mussels, cockles, peppers, corned beef, etc.
Pear shaped can
44 can
Hansa can
1/4 club can
Composite can
Spam can
Fiesta can
Lata Snack
Dingley can
1-2-3 can
Lata 1/15
Large hansa can
1 Pound oval can
Oval 120 can
1/4 P long can
SPECIFICATIONS
ACCEPTED CAN SIZES
- Max. Diagonal – 6 stations clincher: 165 mm
- Max. Diagonal – 8 stations clincher: 125 mm
- Width Range: 45 – 110 mm
- Height Range: 15 – 275mm
KEY FEATURES
- Rated speed: Up to 300 cans/minute
- Seaming heads: 5 heads rotary carousel
- Can seaming op.: Still standing (cans don’t rotate)
- Second operation off-seam setting: Yes
- Anti Twist to compensate seam twisting: Yes
- Main drive gear box: Oil bath
- Lubrication: Grease
- Easy maintenance & greasing: Yes
- Can infeed & outlet: Straight line
- Can entrance to machine: By timing screw
- Clincher: 6 or 8 stations rotary clincher with vertical motion
- Cover separator: Single knife
- Mechanical protection against overloads: Yes
- No can/No cover feed: Yes
- Parts made stainless to optimize hygienic design: 90%
- Safety enclosure: Stainless steel with door interlocks following CE safety regulations
- Internal lighting of the complete working area: By LED lights
- Stainless steel spillage collecting tray covering machine frame: Yes
- Quick cleaning & water drainage: Yes
- Electronic variable speed motor drive: Yes
- PLC: Yes
- Kit of recommended spare parts: Yes
- Tool kit and instruction manual: Yes
PRACTICAL FEATURES
- Estimated tooling changeover: 7 hours
- Can height changeover: 30 minutes
- Can pitch: 210 mm
- Supports round cans: No
DIMENSIONS & CONSUMPTIONS
- Overall dimensions (LxWxH): 6.138 x 2.072 x 1.604 mm
- Can feeding conveyor height: 1.100 – 1.160 mm
- Net weight: 5.500 Kg
- Motor: 15 Hp
- Compressed air: 40 L/H 6 Kg/cm3
OPTIONAL
- Can making version: Yes
- Filler connecting parts: Yes
- Touch screen control panel: Yes
- Mechanical cover marker for a max of 2 rows x 7 marks: Yes
- Extended lid chute with vibrator: Yes