Depending on can shape, size and product packed inside. To be confirmed each time.
Max mechanical capacity of 48.000 cans/ shift.
ONE SEAMING HEAD
Short cycle seaming operation for achieving a perfectly balanced seam.
Its excellent seaming quality is backed by the most renowned can makers.
ROTARY CLINCHER
Vertical motion with six stations.
Best clincher on the market. Perfect for highly overfilled cans such as sardines, squid, cockles, octopus, mussels, sauerkraut…
FOR IRREGULAR CANS
For all can shapes: rectangular, square, oval etc. with max can diagonal of 165 mm.
1/4 club, dingley, oval, hansa and more.
100 CANS PER MINUTE
Depending on can shape, size and product packed inside. To be confirmed each time.
Max mechanical capacity of 48.000 cans/ shift.
ONE SEAMING HEAD
Short cycle seaming operation for achieving a perfectly balanced seam.
Its excellent seaming quality is backed by the most renowned can makers.
ROTARY CLINCHER
Vertical motion with six stations.
Best clincher on the market. Perfect for highly overfilled cans such as sardines, squid, cockles, octopus, mussels, sauerkraut…
FOR IRREGULAR CANS
For all can shapes: rectangular, square, oval etc. with max can diagonal of 165 mm.
1/4 club, dingley, oval, hansa and more.
AN IRREGULAR CAN SEAMER WITH A SUPERIOR PERFORMANCE
Best speed / seaming quality ratio on the market
1
cans per min
1
cans per 8 hrs shift
1
cans per month
1
cans per year
OUTSTANDING SEAMING QUALITY
JK Somme’s seaming heads for irregular cans are the result of more than 100 years of continuous development. They include standard key features such as the following:
- Patented “Anti Twist” technology allowing copying disc realignment without the need of regrinding.
- Short cycle seaming system with rolls working in opposition for a perfect balanced seam.
- Two first & two second operation seaming rolls/arms.
- Pre-curling roll of the covers (optional).
- Multi-adjustable seaming operation cams.
- Extra rigid seaming levers for a perfect copy.
- Stainless steel finish.
The final result is a seaming quality that meets and exceeds the toughest international seaming standards (American FDA, Canadian CFIA) backed by the most renowned can makers
ROTARY CLINCHER FOR OVERFILLED CANS
It acts as a can topper, pressing down and fitting any protruding product back into the can. It acts also as a guillotine, cutting off sardine tails, octopus tentacles or pieces of meat that hang over the edges of the cans.
- The clincher separates and feeds each lid accurately onto each can body. With 6 stations, process is continuous, slow & precise.
- Pushes and fits overfilled product into the can.
- After that displaces the excess of oil, brine or sauce from each can before seaming.
- Clinches and holds every lid onto its can body at two opposite points.
Safest and most effective rotary clincher on the market when canning complicated products such as large sardines, squid, octopus, mussels, cockles, peppers, corned beef, etc
Pear shaped can
44 can
Hansa can
1/4 club can
Composite can
Spam can
Fiesta can
Dingley can
1-2-3 can
Lata 1/15
Large hansa can
1 Pound oval can
Oval 120 can
1/4 P long can
corned beef can
SPECIFICATIONS
ACCEPTED CAN SIZES
- Max. Diagonal: 165 mm
- Width Range: 45 – 110 mm
- Height Range: 15 – 275mm
KEY FEATURES
- Rated speed: Up to 100 cans/minute
- Seaming heads: Single UNIMAG
- Can seaming op.: Still standing (cans don’t rotate)
- Second operation off-seam setting: Yes
- Anti Twist to compensate seam twisting: Yes
- Main drive gear box: Oil bath
- Lubrication: Grease
- Easy maintenance & greasing: Yes
- Can infeed & outlet: Straight line
- Can entrance to machine: By timing screw
- Clincher: 6 stations rotary clincher with vertical motion
- Cover separator: Single knife
- Mechanical protection against overloads: Yes
- No can/No cover feed: Yes
- Parts made stainless to optimize hygienic design: 80%
- Safety enclosure: Stainless steel with door interlocks following CE safety regulations
- Internal lighting of the complete working area: By LED lights
- Stainless steel spillage collecting tray covering machine frame: Yes
- Quick cleaning & water drainage: Yes
- Electronic variable speed motor drive: Yes
- PLC: Yes
- Kit of recommended spare parts: Yes
- Tool kit and instruction manual: Yes
PRACTICAL FEATURES
- Estimated tooling changeover: 5 hours
- Can height changeover: 10 minutes
- Can pitch: 210 mm
- Supports round cans: Yes
DIMENSIONS & CONSUMPTIONS
- Overall dimensions (LxWxH): 2.751 x 1.948 x 2.036 mm
- Can feeding conveyor height: 912 – 992 mm
- Net weight: 2.550 Kg
- Motor: 4 Hp
- Compressed air: 40 L/H 6 Kg/cm3
OPTIONAL FEATURES
- Can making version: Yes
- Filler connecting parts: Yes
- Touch screen control panel: Yes
- Mechanical cover marker for a max of 2 rows x 7 marks: Yes
- Extended lid chute with vibrator: Yes